Furnace Tune-Up in Minneapolis & St. Paul, MN

Furnace Tune-Up Service in Minneapolis, St. Paul, Bloomington, MN, and Surrounding Areas

$149 Furnace Tune-Up

  • 10-Point maintenance checkup. Test Carbon Monoxide levels.
  • Check filter, operation cycle, safety controls, heat exchanger.
  • Check thermostat operation. Lubricate moving parts.
  • Clean burners, blower motor, and flame sensor.

Furnace Tune-Up Living in the Minneapolis St. Paul metro area means that your home’s heating system needs to be in top condition to handle our frigid winters without breaking the bank, and to eliminate health and safety risks for your family. After six months or more of being idle, your forced-air furnace needs to be inspected and serviced before you turn up the thermostat and crank up the heat. Even if you’ve already started using your heating system, it’s not too late to have it inspected and tuned up by a professional heating service technician to prevent expensive repairs and potential loss of heat in the middle of a cold winter.

How Our 10-Point Furnace Inspection Protects You

Furnace Tune-Up Putting off this important chore can lead to sudden furnace failures in the depth of Minnesota winter when all heating repair contractors in Minneapolis and St. Paul are extremely busy. Don’t risk having a heating crisis or emergency by neglecting an annual inspection and evaluation. As Twin Cities most trusted HVAC contractor, we offer an inspection and tune-up service to homeowners in Minneapolis St. Paul at a special low price of just $149. We inspect and service all brands, including Carrier, Lennox, Daikin, Rheem, Bryant, Trane, Ruud, Goodman, American Standard, Payne, Armstrong, Amana, LG, Samsung, Coleman, Luxaire, Heil, ArcoAire, Janitrol, and more. A complete inspection by our service technician will include the following checks, and more:

  • Thermostat operation
  • Ignition system
  • Proper combustion
  • Blower operation
  • The area around furnace for hazards
  • Air filters and electrostatic filters
  • Exhaust vent system
  • Ductwork for leaks and accumulations of dust and debris
  • Supply air system
  • Carbon Monoxide detectors

Your home heating system is more complex than you think. An annual inspection by a licensed Minnesota heating contractor will check all components for problems. During our 10-point checkup, your service technician will make any needed adjustments and will lubricate moving parts. Then, he’ll thoroughly clean your furnace’s burners, blower motor, and flame sensor to help assure proper operation and maximum efficiency. If any other problems are spotted, the technician will discuss these with you and discuss the cost of any needed repairs in advance. Most repairs can be made on the spot, at the time of the inspection and tune-up.

  • Furnace Tune-UpPrevent Carbon Monoxide Poisoning
    Your home heating gas furnace may be a threat to your family. Defective furnaces can emit deadly Carbon Monoxide fumes that can kill. There are two critical things you can do to protect your family from this odorless gas, and you should do them today. Install a CO detector inside or near your bedroom. Check your furnace annually to check for potential defects. An annual professional inspection will check for the carbon monoxide level and ensure safe operation.
  • Furnace Tune-UpHow to Improve Your Furnace Efficiency
    While regular professional furnace check-ups and cleaning are very important steps in keeping your furnace trouble-free and operating efficiently, there are chores you need to handle on your own, for the same reason. Keeping the area near your furnace clean and free of flammable materials is your responsibility. It will help prolong the life of your furnace and eliminate fire risks. Just a little time spent on a regular basis will pay off in a big way.

Professional Furnace Tune-Up and Inspection Service in the Twin Cities

Our Minnesota heating company recommends that you call for an inspection and tune-up of your furnace in the fall before the winter season begins, but it’s never too late to have this important preventive maintenance done at any time. Our expert technicians are on call for service and repair throughout the heating season, even after hours and on weekends. Call Residential Heating and Air Conditioning for any furnace maintenance or repair needs to assure you of safe, efficient heat throughout the heating season.

No matter where you live in the Twin Cities, our experienced technicians are just one call away. We tune up, check, clean and inspect furnaces in homes across the metro, ranging from St. Louis Park, Golden Valley, Minnetonka and Wayzata to Bloomington, Apple Valley, Eagan and Lakeville, and from Woodbury, Cottage Grove, Oakdale and Inver Grove Heights to Brooklyn Park, Andover, Blaine and Ramsey.

Have questions?  Submit a request through our online request form or give us a call and our specialist will help guide you through the different furnace tune-up options.